Rolyan Aquaplast Original OptiPerf Beige 3.2mm Splinting Material (46cm x 61cm)

The Rolyan Aquaplast Original OptiPerf Beige 3.2mm Splinting Material (46cm x 61cm) is an uncoated thermoplastic splinting material that combines moderate resistance to stretch with moderate drape and good conformability. Ideal for more experienced splinters, Aquaplast Original clings to the skin while contouring, freeing up therapists’ hands during splint forming.

What’s Included?

• 1 x Sheet of 3.2mm Splinting Material

What Size Is the Splinting Material?

The Roylan Splinting Material measures 46 x 61cm, allowing you to cut it to the required size. It features a thickness of 3.2mm.

Who Can Use the Rolyan Aquaplast OptiPerf Beige?

The Rolyan Aquaplast OptiPerf Splinting Material is perfect for dynamic splinting and outrigger attachments. It is suitable for a wide variety of upper and lower limb pathologies.

Stability and Firm Support

At 3.2mm, this product is the traditional thickness for splints, providing stability and firm support. This makes the material well-suited for a number of functions, including positioning and holding joints, aiding abnormal tone, contractures and fracture bracing. In general, the Rolyan Aquaplast Original 3.2mm is ideal for static, dynamic and progressive splinting of the upper and lower extremities.

OptiPerf 19% Perforation

This version of the Aquaplast Original features OptiPerf 19% perforation. As a result, the material is lighter and provides greater ventilation for improved comfort and compliance.

Handling Characteristics of the Rolyan Aquaplast 2.4mm

• Controlled stretch, shapes easily
• Clings to the skin while contouring, providing the experienced therapist with an extra set of hands while forming the splint
• Provides the same handling properties as Aquaplast-T but bonds instantly and permanently on contact
• Great for attaching outriggers or other components
• Resists fingerprinting

Bonding of the Rolyan Aquaplast Splinting Material

The Rolyan Aquaplast should be heated for one minute in water at 70 to 75°C for 4 to 6 minutes of working time.

• Bonds permanently when heated surfaces are pinched together
• Bond is especially strong if material is dry-heated