Rolyan San-Splint Perforated White Splinting Material

The Rolyan San-Splint Perforated White Splinting Material is ideal whenever the highest levels of control and rigidity are required. Rolyan’s most rigid thermoplastic, San-Splint is a rubber-based isoprene material that provides maximum resistance to stretch.

What’s Included?

The Rolyan Splinting Material is available as either a single sheet or a pack of four sheets. Your required option can be selected from the drop-down menu at the top of the page.

What Size Is the Splinting Material?

The Rolyan Splinting Material measures either 46 x 61cm or 61 x 91cm as required. Your required option can be selected from the drop-down menu at the top of the page.

Who Can Use the Rolyan San-Splint Thermoplastic?

Uncoated, the material enables easy and secure permanent bonding – perfect for adding strapping, padding and attachments. This version of the material features 1% perforation, providing improved comfort and compliance without loss of rigidity, making it ideal for the

• Upper and lower limb pathologies
• Splints requiring a high degree of control
• Medium to large splints including body jackets and back supports
• Fracture bracing
• Neurological pathologies
• Shoe orthotics

Handling Characteristics of the Rolyan San-Splint

• Rubber-based isoprene material with a high degree of control and rigidity
• Can be worked aggressively without finger printing
• Maximum resistance to stretch
• Can be softened in a hot air oven or heat pan
• Excellent permanent bonding
• Slightly tacky when heated in order to help maintain splint position – this gives the therapist an extra pair of hands for ease of splint fabrication
• Edges trim easily for convenient use
• Features 1% perforation for improved comfort and compliance without loss of rigidity

Bonding of the Rolyan San-Splint Perforated White

The Rolyan San-Splint splinting material is uncoated, meaning excellent permanent bonding – for secure strapping, padding and attachments – can be achieved.

• San-Splint 1.6mm should be heated for 35 seconds in water at 65 – 70°C, giving 1 minute of working time
• San-Splint 3.2mm should be heated for 1 minute in water at 70 – 75°C, giving 3 – 5 minutes of working time